The Kawasaki Ninja 250R (previous generations had market-specific names) is a motorcycle originally introduced by kawaski in 1983. As the marque's entry-levelsport bike The motorcycle has undergone few changes throughout its quarter-century lifetime, having received only two substantial redesigns.
Nomenclature
The fourth-generation model is marketed as the Ninja 250R in all markets. The motorcycle is also referred to by its platform designation, EX250, to which a generational suffix is 
Description and features
The Ninja 250R's particular ergonomics, cahassis design, and engine placement have resulted in a motorcycle that straddles the standard andsport . The Ninja's riding posture also falls somewhere between standard and sport.
The latest model, the EX250-J or fourth generation, brought the Ninja's first major update in many years. Appearance upgrades included 17-inch wheels and completely redesigned fairings which give the motorcycle a sleeker, more modern appearance.
First generation
The first generation was produced between 1983 and 1984, and known by the production number EX250-C. It was sold as the GPZ-250. Sold only in its home market of Japan, this earliest, belt driven version was first produced in 1983, and shares no commonality with later generations. bike has 35mm fork tubes.
Second generation
Produced between 1986 and 1987 was the EX250-E. This model was sold as the Ninja 250R in Canada and the U.S. between 1986 and 1987. It was known as the GPZ-250R elsewhere. When originally introduced, it was more costly than the Honda Rebel, and reviewers 
Third generation
For the 1988 model year, there were both cosmetic changes and changes in engine tuning. While the bore and stroke, and other major engine components, were unchanged, minor tuning adjustments were made. The carburetor diameters were reduced 2 mm to 32 mm (1.3 in), the cylinder compression ratio was increased from 12.0:1 to 12.4:1, and ignition timing advance was increased. Reviewers reported that this made the engine more free-revving, reaching the high 14,000 redline more quickly, and the tested top speed increased by a few miles per hour. The new, more fully-enclosed bodywork was complimented for being stylish, at the time, and easily mistaken for the larger ninja 750 .
The third generation of production of the Ninja 250 encompassed three models:
- EX250-F - The most widespread EX250 variant, the E model was completely revamped and sold as the F model between 1988 and 2007 in the U.S. Canada received the model between 1988 and 1999, and it was available elsewhere as the GPX-250R as early as 1987.
- EX250-G - Sold only in its home market of Japan, this version was known as the GPX-250R-II. It featured dual front brakes and a wider wheel and tire (110/80-16). All other parts were identical to the -F model. It was sold after 1988.
- EX250-H - This model came to Canada as the Ninja 250R between 2000 and 2002, after which it received a new name: ZZR-250, in line with the -H model's name
elsewhere in the world, where it had existed since 1992. This motorcycle has few parts in common with the -F model, though it shares the same engine, albeit with different casings. It sports a lateral aluminum frame, a different fairing (designed to make it look sportier), larger 17-inch wheels, an adjustable rear shock absorber, adjustable brake and clutch levers, a smaller drive sprocket, computer-controlled timing advance, and a revised electrical system.
Fourth generation
In 2008, Kawasaki gave the EX250 its most thorough modernization in many years. The EX250-J model is known as the Ninja 250R worldwide, regardless of market.
Parts from the third generation are still found on the -J, but its redesigned exterior panels bring the Ninja's appearance out of the 1990s and into line with late-2000s sportbikes. The engine and drivetrain retain 30% of the -F model's parts, according to Kawasaki. The engine's compression and maximum torque have been lowered to provide better midrange performance. The redesign of the engine resulted in improvements in engine response at low engine speeds, and making the bike smoother and "much easier to ride." Though the 
With the arrival of the EX250-J, manufacturing continues to be located in Thailand
No comments:
Post a Comment